FKB SeriesFork Light Barriers (IR/VIS)
Trigger Light Barriers (Fork Shape)General technical data ....
GENERAL TECHNICAL DATA:
Design and variants | Fork light barriers, available ► in different sizes ► with various light sources (-IR or -VIS) ► optionally with blast air connector (-BL) ► with different connecting possibilities (cf. "Type of connector"): without connector, type -P, type -TPN, type -TPO, type -M8 ► with different cable lengths (500mm or 1000mm, not with type -M8) |
Suitable amplifiers or electronic control units |
depends on sensor type |
Fork sizes | depends on sensor type |
Light source (transmitter) | IR: IR-LED, 905nm, DC-operation: max. optical power <0,4mW, AC-operation: average optical power <0,4mW VIS: red LED, 660nm, optical power <0,4mW |
Light exit at transmitter | depends on sensor type |
Size of aperture (receiver) | depends on sensor type |
Min. detectable object | depends on sensor type |
Reproducibility | depends on sensor type |
Optical filter | IR: Day light block filter VIS: IR block filter |
Operation mode | Direct light (DC) or alternating light (AC), depends on amplifier used |
Ambient light | up to 5000 Lux (in case of AC-operation) |
Blast air connector | with version -BL: integrated in the housing of the fork light barrier |
Housing material | Aluminum, anodized in blue |
Housing dimensions | depends on sensor type |
Type of connector (cable or plug) |
with non-plug type (= without suffix -P, -TPN, -TPO, -M8): integrated cable without plug (open strands, here a direct mounting to amplifier at factory is necessary) with type -P: integriertes Kabel mit 8-pol. Stecker Binder Serie 712 with type -TPN: integriertes Kabel mit Werkzeugstecker incl. 8-pol. Stecker Binder Serie 712 bei Typ -TPO: integriertes Kabel mit Werkzeugstecker incl. 5-pol. Stecker Binder Serie 680 bei Typ -M8: mit 4-pol. M8-Stecker (hier Anschlusskabel zum Verstärker notwendig) |
Connecting cables | bei steckerlosem Typ: Direktanschluss an Verstärker (gleichzeitige Bestellung von Verstärker) bei Typ -P: kein Anschlusskabel notwendig (Anschluss an Verstärker über 8-pol. Stecker) bei Typ -TPN: Anschlusskabel cab-tlb8/702 bei Typ -TPO: Anschlusskabel SI-KAB2 bei Typ -M8: Anschlusskabel cab-las4 |
Operating temp. range | -20°C ... +80°C |
Storage temp. range | -20°C ... +80°C |
Enclosure rating | IP67 |
EMC test acc. to | DIN EN 60947-5-2 |