|
Data sheet:
|
APP N° 803
Param.:
|
INI:
|
|
Farbmessung von Kunststoffdeckeln Die Farbe von Plastikkappen soll gemessen werden.
Plastic cap color measurement
The color of plastic caps should be measured.
|
|
|
Data sheet:
|
APP N° 799
Param.:
|
|
Präsenzkontrolle einer Vergussmasse auf einer Kunststoffkomponente Das Vorhandensein einer Vergussmasse auf einem Plastikteil soll überwacht werden.
Presence control of a potting compound on plastic components
The presence of a sealing compound on plastic components should be controlled.
|
|
|
Data sheet:
|
APP N° 797
|
Farbkontrolle von Kunststoffrohlingen aus recyceltem Material Plastikrohlinge, gefertigt aus recyceltem Material sollen in Hinblick auf die Farbe überwacht werden.
Color control of preforms made of recyclates
Preforms made of recycled material should be color controlled.
|
|
APP N° 795
|
Dickenmessung einer transparenten Stretch-Folie Die Dicke einer optisch transparenten Stretch-Folie soll ermittelt werden.
Translucent stretch film thickness measurement
The thickness of a translucent stretch film should be measured.
|
|
|
Data sheet:
|
APP N° 793
|
Farbkontrolle von Kunststoffflaschenrohlingen Die Farbe von Plastikflaschenrohlingen soll überwacht werden.
Color control of preforms
The color of preforms should be controlled.
|
|
|
Data sheet:
|
APP N° 790
INI:
|
|
Glanzmessung von Kunststoffbodenbelägen Der Glanzgrad von Kunststoffbodenbelägen soll gemessen werden.
Gloss measurement of synthetic floorings
The gloss of plastic floors should be measured.
|
|
|
Data sheet:
|
APP N° 789
|
Dickenmessung von Kunststoff-Folien Die Dicke von Kunststoff-Stretch-Folien soll ermittelt werden.
Plastic film thickness measurement
The thickness of plastic stretch film should be measured.
|
|
|
Data sheet:
|
APP N° 788
Param.:
|
|
Schlierenerkennung auf einer Kunststoffoberfläche Eine Kunststoffoberfläche soll auf Schlieren- und Streifenfreiheit kontrolliert werden.
Streak detection on a plastic surface
A plastic surface should be controlled regarding freedom from streaks and striae.
|
|
|
Data sheet:
|
APP N° 774
|
Unterscheidung zwischen der PET-Seite und der PE-Seite von Kunststoffplatten Die PET-Seite von Kunststoffplatten soll von der PE-Seite unterschieden werden.
Differentiation of PE and PET side of plastic plates
The PET side of plastic plates should be differentiated from the PE side.
|
|
|
Data sheet:
|
APP N° 765
Param.:
|
INI:
|
|
Farbmarkenerkennung auf lichtdurchlässigen Plastikklebebändern Auf transparenten Kunststoffklebebändern sollen Farbmarken erkannt werden.
Color mark recognition on transparent plastic films
A color mark on a translucent synthetic tape should be recognized.
|
|
|
Data sheet:
|
APP N° 764
Param.:
|
INI:
|
|
Lagekontrolle von Plastikteilen Die Lagerichtigkeit von transparenten Kunststoffteilen soll überwacht werden.
Synthetic component orientation control
The orientation of transparent plastic parts should be controlled.
|
|
|
Data sheet:
|
APP N° 763
Param.:
|
INI:
|
|
Farbmarkendetektion auf transparenten Klebestreifen Farbmarken sollen auf transparenten Klebestreifen erkannt werden.
Color mark detection on transparent plastic adhesive strips
Color marks should be detected on transparent synthetic glue strips.
|
|
|
Data sheet:
|
APP N° 746
Param.:
|
|
Farbmessung von Kunststoffplatten mit unterschiedlicher Oberfläche Kunststoffplatten mit glatter, mittlerer sowie rauer Oberfläche sollen in Hinblick auf die Farbe gemessen werden.
Color measurement of plastic plates with different structures
The color of plastic plates with a fine, middle and coarse surface should be measured.
|
|
|
Data sheet:
|
APP N° 740
Param.:
|
|
Rückseite/Vorderseite-Unterscheidung von Kunststoffkomponenten Die Rückseite von flachen Plastikteilen soll von der Vorderseite unterschieden werden.
Backside/frontside differentiation of synthetic parts
The backside should be differentiated from the frontside of flat synthetic components.
|
|
|
Data sheet:
|
APP N° 739
Param.:
|
|
Vorderseite/Rückseite-Unterscheidung bei Kunststoffteilen Die Vorderseite von flachen Plastikkomponenten soll von der Rückseite unterschieden werden.
Frontside and backside differentiation of a plastic part
The frontside of a flat plastic part should be differentiated from the backside.
|
|
|
Data sheet:
|
APP N° 727
|
Dickenmessung von Wärmedämmplatten Die Dicke von Wärmeisoliermatten soll INLINE gemessen werden.
Thickness measurement of thermal insulation panels
The thickness of thermal insulation panels should be measured INLINE.
|
|
|
Data sheet:
|
APP N° 724
|
Farbunterscheidung zwischen blau- und gelbstichigen klaren, transparenten Kunststoffteilen Gelbstichige klare Plastikteile sollen von blaustichigen transparenten Kunststoffteilen unterschieden werden.
Differentiation of yellowish cast to bluish shade clear transparent plastic components
Clear bluish transparent plastic components should be differentiated from yellowish parts.
|
|
|
Data sheet:
|
APP N° 723
Param.:
|
|
Farbunterscheidung von klaren, transparenten Kunststoffteilen Gelbstichige transparente klare Kunststoffkomponenten solllen von blaustichigen Teilen unterschieden werden.
Color differentiation of clear transparent plastic parts
A yellowish cast to a bluish shade of transparent clear plastic components should be detected.
|
|
|
Data sheet:
|
APP N° 722
Param.:
|
|
Unterscheidung der bläulichen von den gelblichen Plastikkomponenten In Richtung Blau tendierende weiße Kunststoffteile sollen von ins Gelbe gehenden weißen Plastikkomponenten unterschieden werden.
Differentiation of bluish and yellowish colored plastic parts
Blueish colored plastic parts should be differentiated from yellowish colored plastic components.
|
|
|
Data sheet:
|
APP N° 716
Param.:
|
|
Zählen von transparenten Kunststoffdeckeln Lichtdurchlässige Kunststoffdeckel sollen gezählt werden.
Counting of transparent plastic lids
Transparent plastic lids should be counted.
|
|
|
Data sheet:
|
APP N° 715
Param.:
|
|
Zählen von lichtdurchlässigen Kunststoffbechern Transparente Plastikbecher sollen gezählt werden.
Counting of semitransparent plastic cups
Semitransparent plastic cups should be counted.
|
|
|
Data sheet:
|
APP N° 713
Param.:
|
|
Zählen von transparenten Kunststoffbehältern Dicht aneinander gereihte transparente Plastikbehälter sollen gezählt werden.
Counting of transparent plastic boxes
Close lined up transparent plastic boxes should be counted.
|
|
|
Data sheet:
|
APP N° 699
|
UVA-Transmissionsmessung von Kunststoffplättchen Die Durchlichteigenschaften im UVA-Bereich sollten gemessen werden.
UVA transmittance of plastic plates
The UVA transmittance of plastic plates should be measured.
|
|
|
Data sheet:
|
APP N° 684
|
Farbkontrolle von dunkelblauen Kunststoffabdeckungen Dunkelblaue Kunststoffabdeckungen sollen in Hinblick auf Farbtoleranzeinhaltung überprüft werden.
Color control of deep blue plastic covers
The color of blue plastic covers should be controlled, whether the respective cover is inside the tolerance range or not.
|
|
|
Data sheet:
|
APP N° 682
|
Unterscheidung einer beschichteten Kunststofffolie von einer unbeschichteten Kunststofffolie Eine unbeschichtete Kunststofffolie soll von einer beschichteten Kunststofffolie unterschieden werden.
Differentiation of coated and uncoated plastic film
An uncoated plastic film should be distinguished from a coated plastic film.
|
|
|
Data sheet:
|
APP N° 672
Param.:
|
|
Präsenzkontrolle eines fluoreszierenden halbtransparenten Deckels auf einem weißen Kunststoffbehälter Das Vorhandensein eines fluoreszierenden halbtransparenten Deckels auf einer Plastikbox soll kontrolliert werden.
Presence control of a fluorescent semitransparent cover on a white plastic box
The presence of a fluorescent semitransparent cover should be controlled.
|
|
|
Data sheet:
|
APP N° 652
Param.:
|
|
Kleberaupenpräsenzkontrolle auf Kunststoffkomponenten Das Vorhandensein einer Leimspur auf einer schwarzen Kunststoffoberfläche soll überwacht werden.
Glue bead presence control on plastic components
The presence of adhesive on black plastic parts should be controlled.
|
|
|
Data sheet:
|
APP N° 651
Param.:
|
INI:
|
|
Präsenzkontrolle einer Primerschicht auf einer Kunststoffoberfläche Das Vorhandensein einer Primerschicht auf einer Kunststoffkomponente soll überwacht werden.
Presence control of a primer layer on a plastic component
A primer layer on a plastic surface should be detected.
|
|
|
Data sheet:
|
APP N° 643
|
Knotenüberwachung an Kunststoffbändern Plastikbänder sollen in Hinblick auf Knoten überwacht werden.
Knot detection on plastic straps
Knots in plastic straps should be inline detected.
|
|
|
Data sheet:
|
APP N° 635
Param.:
|
INI:
|
|
Lagerichtigkeitskontrolle von Kunststoffkappen Die Lage von Kunststoffkappen (korrekt oder auf dem Kopf stehend) soll erfasst werden.
Direction control of plastic caps
The direction (upside or upside down) of plastic caps should be controlled.
|
|
|
Data sheet:
|
APP N° 623
|
Detektion einer Lücke einer fluoreszierenden Beschichtung auf einem Kunststoffband Eine unter UV-Licht-Einfluss fluoreszierende Schicht auf einem Kunststoffband soll in Hinblick auf Lücken untersucht werden.
Gap detection of fluorescent coating on plastic band
A gap inside fluorescent coating on a plastic ribbon should be detected.
|
|
APP N° 617
Param.:
|
|
Feuchtigkeitsmessung von Kunststoffgranulat Der Wassergehalt von Kunststoffgranulat soll ermittelt werden.
Moisture control of plastic pellets
The very low water content of plastic pellets should be measured.
|
|
|
Data sheet:
|
APP N° 611
|
Farbmessung zweier unterschiedlich eingefärbter transparenter Plexiglasscheiben Eine leicht bläulich sowie eine leicht gelblich eingefärbte transparente Acrylglasscheibe sollen in Hinblick auf die Farbe gemessen werden.
Color measurement of two different colored transparent Plexiglas sheets
A slightly blueish and a slightly yellowish colored transparent acrylic glass sheet should be color measured.
|
|
|
Data sheet:
|
APP N° 609
Param.:
|
|
Kleberauftragkantenverfolgung auf transparenter Kunststofffolie Die Kante einer Kleberspur auf transparenter Kunststofffolie soll erkannt werden.
Glue line edge tracing on transparent plastic film
The edge of a glue line on a transparent plastic film should be detected.
|
|
|
Data sheet:
|
APP N° 606
Param.:
|
|
Farbmessung von halblichtdurchlässigen Plastikteilen Die Farbe von halblichtdurchlässigen Kunststoffkomponenten soll gemessen werden.
Color measurement of semitransparent plastic parts
The color of semitransparent plastic components should be measured.
|
|
|
Data sheet:
|
APP N° 602
Param.:
|
|
Farbmessung an Kunststoffteilen Plastikteile sollen in Hinblick auf die Farbe gemessen werden.
Color measurement of plastic parts
The color of plastic parts should be measured.
|
|
|
Data sheet:
|
APP N° 600
Param.:
|
|
Farbmessung von transparenten Kunststoffpellets Transparente Plastikpellets sollen in Hinblick auf die Farbe überwacht werden. Insbesondere soll die Vergilbung kontrolliert werden.
Color measurement of transparent plastic pellets
Transparent plastic pellets should be color controlled and especially the yellowing should be detected.
|
|
|
Data sheet:
|
APP N° 599
Param.:
|
|
Vorhandenseinskontrolle eines transparenten Plastikstreifens Die Präsenz eines transparenten Kunststoffrandstreifens soll überwacht werden.
Presence control of a transparent plastic film
The presence of a transparent edge strip should be controlled.
|
|
|
Data sheet:
|
APP N° 595
Param.:
|
INI:
|
|
Unterscheidung der Vorder- von der Rückseite von LKW – Planen Die Vorderseite von LKW – Planen soll von der Rückseite unterschieden werden.
Differentiation of front side and backside of canvas
The front side of canvas should be differentiated from the backside.
|
|
|
Data sheet:
|
APP N° 580
Param.:
|
|
Becherranderkennung Der Becherrand von Plastikbechern soll detektiert werden.
Edge detection on plastic cups
The rims of stacked plastic cups should be detected.
|
|
|
Data sheet:
|
APP N° 561
Param.:
|
INI:
|
|
Farbmessung von Kunststoffkomponenten Plastikteile sollen in Hinblick auf die Farbe gemessen werden.
Color measurement of plastic components
Plastic components should be color measured
|
|
APP N° 560
Param.:
|
|
Anwesenheitskontrolle einer UVC – Licht absorbierenden Schicht auf einer transparenten Kunststofffolie Das Vorhandensein einer UVC absorbierenden Schicht auf einem transparenten Plastikstreifen soll überwacht werden.
Detection of an UVC absorbing coating on transparent plastic film
UVC absorbing coating should be detected on transparent plastic films.
|
|
|
Data sheet:
|
APP N° 558
Param.:
|
|
Lückenerkennung in Klebestellen auf transparenten Etiketten Auf transparentem Etiketten soll die Lücke einer Klebestelle erfasst werden.
Glue line gap detection on transparent label
On a transparent label a gap in a glue line should be detected.
|
|
|
Data sheet:
|
APP N° 549
Param.:
|
|
Glanzmessung von transparenten Kunststoffbahnen Verschiedene transparente Plastikbahnen sollen in Hinblick auf den Glanzgrad untersucht werden. Dabei soll sowohl die Vorder- als auch die Rückseite kontrolliert werden.
Gloss measurement of transparent plastic films
The gloss factor of different transparent plastic films should be measured on both sides.
|
|
|
Data sheet:
|
APP N° 547
Param.:
|
INI:
|
|
Stanzlocherkennung bei transparenten Kunststoffstreifen Stanzlöcher sollen auf transparenten Plastikstreifen erfasst werden.
Punched hole detection at transparent plastic film
Punched holes should be detected at transparent plastic films.
|
|
|
Data sheet:
|
APP N° 545
Param.:
|
INI:
|
|
Kontrolle zweier Plastikrohre anhand der Innenseite Kunststoffrohre sollen bezüglich der Oberflächenbeschaffenheit der Innenseite unterschieden werden.
Differentiation of the inner surface of plastic tubes
The inner surface of plastic tubes should be controlled.
|
|
|
Data sheet:
|
APP N° 537
Param.:
|
INI:
|
|
Farbunterscheidung von Plastikteilen im Interieurbereich Kunststoffkomponenten aus dem Interieurbereich sollen im Hinblick auf die Farbe unterschieden werden
Color differentiation of interior plastic parts
Plastic parts, which are used in the automotive interior field, should be color differentiated
|
|
|
Data sheet:
|
APP N° 536
Param.:
|
INI:
|
|
Präsenzkontrolle eines Silikonfilms auf einem Kunststoffteil Das Vorhandensein einer Silikonschicht auf einer Plastikkomponente soll überwacht werden
Detection of silicone oil film on plastic components
The presence of silicon oil should be controlled on the surface of plastic components.
|
|
|
Data sheet:
|
APP N° 531
Param.:
|
|
Detektieren von holographischen Referenzmarken Holographische Referenzmarken sollen erkannt werden. Dabei ist zu beachten, dass sowohl die grün als auch die rot reflektierenden Marken mit derselben Einstellung erfasst werden müssen.
Detection of holographical reference marks
Holographic reference marks should be detected. There are red as well as green reflecting reference marks which should be detected with the same adjustment.
|
|
|
Data sheet:
|
APP N° 519
|
Qualitätskontrolle von transparenten planparallelen Kunststofffenstern Transparente Kunststoffplättchen sollen in Hinblick auf die optische Qualität überwacht werden. Dabei sollen die Plättchen mit optischen Aberrationsfehlern aussortiert werden.
Quality control of transparent plastic plates
Transparent plastic plates should be quality controlled. The parts with a high optical quality should be differentiated from components with optical aberration failures.
|
|
|
Data sheet:
|
APP N° 518
Param.:
|
INI:
|
|
Farbmessung von recyceltem Kunststoffgranulat Recyceltes Kunststoffgranulat soll in Hinblick auf die Farbe überwacht werden. Dabei ist zu beachten, dass sich die Position der einzelnen Granulatkörner hinter dem Schauglas verändern kann, sodass ein großer Messfleck von Vorteil wäre, um einen aussagekräftigen Farbmittelwert zu erhalten. Des Weiteren muss beachtet werden, dass in der Nähe des Schauglases Temperaturen um die 120°C herrschen.
Color measurement of recycled plastic pellets
The color of recycled plastic pellets should be measured. It has to be taken into account, that the position of the pellets behind the inspection glass can vary, thus a big light spot has a certain advantage to get a proper average measurement value. Furthermore, it should be considered, that the ambient temperature around the inspection glass can reach 120°C.
|
|
|
Data sheet:
|
APP N° 510
|
Glanzgradmessung von semitransparenten Kunststofffolien Der Glanzgrad von lichtdurchlässigen Kunststofffolien soll inline gemessen werden.
Gloss measurement of translucent plastic films
The gloss level of semi-transparent plastic films should be inline measured.
|
|
|
Data sheet:
|
APP N° 504
Param.:
|
|
Wandstärkenkontrolle von Plastikteilen Die Wandstärke von Kunststoffteilen soll ermittelt werden. Dabei ist zu berücksichtigen, dass die Lichtdurchlässigkeit der Kunststoffteile mit deren Wandstärke korreliert.
Wall thickness control of semitransparent plastic components
The wall thickness of semitransparent plastic components should be determined. It should be taken into account that the opacity correlates to the wall thickness of the plastic parts.
|
|
|
Data sheet:
|
APP N° 491
Param.:
|
|
Höhenmessung von transparenten Kunststoffplatten mit integriertem Gewebe Die Höhe von transparenten Kunststoffplatten mit eingebettetem Stoffgewebe soll gemessen werden.
Height measurement of a transparent plastic plate with embedded fabric
The height of transparent plastic plate with different embedded fabric should be measured.
|
|
|
Data sheet:
|
APP N° 487
Param.:
|
INI:
|
|
Farbmessung von Kunststoffgranulat Die Farbe von Kunststoffgranulat soll während der Produktion gemessen werden.
Color measurement of plastic pellets
The color of plastic pellets should be measured during the production.
|
|
|
Data sheet:
|
APP N° 481
Param.:
|
INI:
|
|
Farbunterscheidung von Kunststoffstifthülsen Plastikhülsen sollen in Hinblick auf die Farbe unterschieden werden.
Color differentiation of plastic pen housings
The color of plastic bushings should be controlled.
|
|
|
Data sheet:
|
APP N° 472
|
Farbunterscheidung von Kunststoffröhrchen Plastikröhrchen sollen in Hinblick auf die Farbe unterschieden werden.
Color differentiation of small plastic tubes
Small violet plastic tubes should be color differentiated.
|
|
|
Data sheet:
|
APP N° 471
Param.:
|
|
Farbunterscheidung von kleinen Kunststoffbürsten Kleine Plastikbürsten sollen in Hinblick auf die Farbe unterschieden werden.
Color differentiation of small plastic brushes
Small plastic brushes should be color differentiated.
|
|
|
Data sheet:
|
APP N° 444
Param.:
|
INI:
|
|
Grauwert-Kontrolle von Siebdruck-Kunststoffplatten Der Grauwert von Siebdruck-Kunststoffplatten soll überwacht werden.
Gray value control of screen printing plastic plates
The gray scale value of screen printing plastic plates should be controlled.
|
|
|
Data sheet:
|
APP N° 443
Param.:
|
INI:
|
|
Farbüberwachung von Siebdruck-Farbmarken Die Farbe von Siebdruck-Farbmarken soll auf Kunststoffplatten kontrolliert werden.
Control of silk-screen printing color marks
Screen printing color marks should be controlled on plastic sheets.
|
|
|
Data sheet:
|
APP N° 435
|
Dickenmessung einer dünnen Schicht auf einer transparenten Kunststofffolie Die Dicke einer dünnen Schicht auf einem optisch transparenten Trägermaterial soll ermittelt werden. Dabei bietet sich eine Transmissionsmessung an, da die Intensität zur Berechnung der Schichtdicke herangezogen werden kann.
Thickness control of a thin layer on a transparent plastic film
The thickness of a thin layer on a transparent plastic film should be measured. To measure the transmission with a through beam system seems to be an adequate method to determine the thickness of a thin layer.
|
|
|
Data sheet:
|
APP N° 434
Param.:
|
INI:
|
|
Opazitätskontrolle von optisch halbdurchlässigen Kunststoffplatten Optisch halbdurchlässige Kunststoffplatten sollen in Hinblick auf die Trübung untersucht werden.
Haze control of semi transparent plastic plates
Semi transparent plastic plates should be controlled with a view to the opacity.
|
|
|
Data sheet:
|
APP N° 433
Param.:
|
INI:
|
|
Farbunterscheidung von Kunststoffverschlüssen Plastikdeckel, wie sie für Trinkflaschen verwendet werden, sollen nach Farbe getrennt werden. Dabei ist zu berücksichtigen, dass die Deckel extrem glänzen.
Color differentiation of plastic caps
Plastic caps for drinking bottles should be color differentiated. It has to be taken into account, that the closures are very glossy.
|
|
|
Data sheet:
|
APP N° 418
|
Unterscheidung von Kunststoffgranulaten Chemisch sowie farblich leicht unterschiedliche Kunststoffgranulate sollen voneinander getrennt werden.
Differentiation of plastic pellets
Chemically and in terms of color different plastic pellets should be distinguished.
|
|
|
Data sheet:
|
APP N° 406
|
Transmissionskontrolle weißer Plastikplatten Weiße Kunststoffplatten sollen in Hinblick auf die Lichtdurchlässigkeit geprüft werden.
Transparency control of white plastic plates
The transparency of white plastic plates should be controlled.
|
|
|
Data sheet:
|
APP N° 399
|
Unterscheidung von semitransparenten Kunststofffolien Halblichtdurchlässige Plastikfolien sollen optisch unterschieden werden.
Differentiation of semitransparent plastic films
Semitransparent plastic films should be differentiated.
|
|
|
Data sheet:
|
APP N° 397
|
Erkennung von Vertiefungen in einer Plastikfolie In einer semitransparenten Folie sollen Vertiefungen präzise erkannt werden. Eine Kontrolle ist dabei nur von oben möglich.
Detection of a deepening in a plastic film
Depressions in a semitransparent plastic film should be detected. The detection is only possible from above.
|
|
|
Data sheet:
|
APP N° 390
|
Farbkontrolle von Kunststofffensterprofilen Kunststofffensterprofile sollen in Hinblick auf die Farbe kontrolliert werden.
Color control of plastic window profiles
Plastic profiles which are used for casement frames should be color controlled.
|
|
|
Data sheet:
|
APP N° 378
|
Farbkontrolle von Kunststoffspritzteilen Spritzteile aus Plastik sollen in Hinblick auf die Farbe kontrolliert werden. Dabei ist zu beachten, dass die Spritzteile neben den Farbunterschieden auch Glanzunterschiede aufweisen. Eine Ausnahme bildet hierbei der Rand, bei dem die Glanzwerte relativ konstant gehalten werden können.
Color control of injection moldings
Injection plastic parts should be color controlled. It has to be taken into account, that the surface of the plastic part is different in the degree of gloss as well as in the color. Only the narrow frame delivers nearly a constant degree of gloss. Thus, the color should be controlled at the narrow edge.
|
|
|
Data sheet:
|
APP N° 370
|
Farbüberwachung von weißen Kunststoffprofilen Die Farbe von weißen Kunststoffprofilen soll kontrolliert werden.
Color control of white plastic profiles
The color of white plastic profiles should be controlled.
|
|
|
Data sheet:
|
APP N° 369
|
Farbmarkenerkennung auf Kunststofffolien Eine schwarz glänzende Farbmarke soll auf einer ebenfalls stark glänzenden Kunststofffolie mit wechselndem Farbhintergrund sicher und präzise detektiert werden.
Color mark detection on plastic film
A black color mark should be detected on a shiny plastic film. At this, it has to be taken into account that different background colors can occur.
|
|
|
Data sheet:
|
APP N° 367
|
Vorhandenseinskontrolle eines Gummipfropfens in einem Kunststoffschraubverschluss Die Präsenz einer Gummidichtung in einem Plastikteil soll überwacht werden.
Presence control of a seal in plastic components
The presence of a seal in a plastic part should be controlled.
|
|
|
Data sheet:
|
APP N° 362
|
Vorhandenseinskontrolle eines Etiketts auf einer Kunststoffflasche Die Präsenz eines Etikettes auf einer Kunststoffflasche soll überwacht werden.
Label presence detection on plastic bottles
The presence of a label on plastic bottles should be controlled.
|
|
|
Data sheet:
|
APP N° 361
|
Farbunterscheidung von Kunststoffflaschenrohlingen Sogenannte Preforms sollen farblich unterschieden werden. Dabei müssen grenzwertige Teile von guten Teilen getrennt werden.
Plastic preforms color control
The color of plastic preforms should be controlled. Good parts should be differentiated from marginal parts.
|
|
|
Data sheet:
|
APP N° 355
|
Breitenkontrolle eines matten Kunststoffbandes Die Breite eines matten Kunststoffbandes soll überwacht werden. Dabei muss mit einer seitlichen Drift des Bandes von ±10mm gerechnet werden, was einen Detektionsbereich von 50mm erforderlich macht.
Width control of a semitransparent plastic film
The width of a semitransparent plastic film should be controlled. At this, the transversal drift of the 18.5mm wide plastic film is around ±10mm, thus the detecting range should be 50mm.
|
|
|
Data sheet:
|
APP N° 354
|
Durchmesserkontrolle von Kunststoffdrähten Der Durchmesser von Kunststoffdrähten soll ermittelt werden, dabei sollen Drähte von 0.1mm bis 2mm Durchmesser erfasst werden.
Diameter control of plastic monofilaments
The diameter of plastic monofilaments should be controlled. At this, monofilaments with diameters starting from 0.1mm up to 2mm are possible.
|
|
|
Data sheet:
|
APP N° 353
|
Doppellagenkontrolle von Kunststofffolien Der Randbereich einer doppellagigen Plastikfolie soll überwacht werden. Dabei geht die Folie im Randbereich von einer Doppellage in eine Einfachlage über.
Double layer control of plastic films
With a view to the changeover from the double layer to the single layer range of a plastic film a sensor system should deliver exactly a signal which informs about the beginning of the single layer as well as the double layer range.
|
|
|
Data sheet:
|
APP N° 350
|
Farbkontrolle von Kunststoffabdeckungen Plastikpins, die in Verbindung mit Sicherheitsgurten zum Einsatz kommen, sollen in Hinblick auf Farbe unterschieden werden.
Color control of plastic pins
Plastic pins which are used for seat belts should be color differentiated.
|
|
|
Data sheet:
|
APP N° 347
|
Kontrolle von Sicherheitsgurtbuchsengehäusen Die Farbe der Gehäuse von Sicherheitsgurtbuchsen soll überwacht werden.
Color control of seat belt sockets
Seat belt sockets should be color controlled.
|
|
|
Data sheet:
|
APP N° 342
|
Präsenzkontrolle eines Kunststoffstreifens Das Vorhandensein einer semitransparenten Kunststofffolie auf einem Umschlag soll überwacht werden. Dabei ist zu beachten, dass der Klebefilm auf dem Trägermaterial leicht fluoreszierende Eigenschaften besitzt, wogegen der matte Plastikfilm das UV-Licht dämpft, wodurch die Intensität der Fluoreszenz der Klebeschicht reduziert wird.
Plastic film presence control
The presence of a plastic film on an envelope should be controlled. It has to be taken into account that the glue stripe of the envelope is slightly fluorescent in the presence of UV light, whereas the matt plastic film (which covers the glue stripe) absorbs the UV light a bit.
|
|
|
Data sheet:
|
APP N° 341
|
Detektion von Faltenwurf eines Plastikfilms Während des Transportes von matter Kunststofffolie soll eine Faltenbildung kontrolliert werden.
Plastic film plunging control
Folds in a matt plastic film should be detected.
|
|
|
Data sheet:
|
APP N° 338
|
Kunststofffolien-Dickenmessung Die Dicke einer Kunststofffolie soll inline ermittelt werden.
Plastic film thickness measurement
The thickness of a plastic film should be measured.
|
|
|
Data sheet:
|
APP N° 337
|
Unterscheidung zwischen Vorder- und Rückseite eines Kunststofffilms Die glänzende Vorderseite eines semitransparenten Kunststofffilms soll von der matten Rückseite unterschieden werden.
Differentiation between front- and backside of a plastic film
The glossy front side of a plastic film should be differentiated from the coarse back side.
|
|
|
Data sheet:
|
APP N° 330
|
Erkennen eines transparenten fluoreszierenden Etiketts auf einem transparenten Trägermaterial Ein transparentes Kunststoffetikett soll auf einem transparenten Kunststoffband detektiert werden. Das Etikett fluoresziert dabei unter Einfluss von UV-Licht.
Detection of a transparent fluorescent label on transparent plastic film
A transparent plastic label should be detected on a transparent plastic film. It should be taken into account, that the label is fluorescent in using UV-light.
|
|
|
Data sheet:
|
APP N° 323
|
Unterscheidung von schwarz bzw. grau eingefärbten Naturfasermaterialien für den Interieurbereich Schwarze Naturfaserkomponenten sollen sicher von grauen Naturfaserkomponenten unterschieden werden.
Color differentiation of black and gray colored natural fiber interior components
Black and gray colored natural fiber components should be quality controlled.
|
|
|
Data sheet:
|
APP N° 320
|
Unterscheidung leicht diffuser Kunststofffolien Die leichte Trübung von transparenten Kunststofffolien soll kontrolliert werden.
Differentiation of slightly diffuse plastic films
Transparent but slightly diffuse plastic films should be differentiated. The haze of the plastic films should be controlled.
|
|
|
Data sheet:
|
APP N° 312
|
Detektion verschiedener Farbmarken auf verschieden farbigen Plastiktuben Auf Kunststofftuben unterschiedlicher Ausführung sollen Farbmarken erkannt werden.
Detection of different color marks on different plastic tubes
Different color marks should be detected on different plastic tubes.
|
|
|
Data sheet:
|
APP N° 301
|
Kantenerkennung an der Vorderseite einer Silikontube Eine Markierung in Form einer Erhöhung soll während der Drehung erkannt werden. Hierzu wird ein Kantendetektor verwendet, der winkelgenau die Position der Tube erfassen kann.
Detection of an edge on the front side of a silicon tube
An edge on a silicon tube should be detected. At this, the silicon tube is turning around its own axis while the laser spot of the laser edge detector is directed onto the front side.
|
|
|
Data sheet:
|
APP N° 297
|
Farbunterscheidung von Kunststoffnippeln Kunststoffnippel sollen farblich unterschieden werden. Dabei ist zu beachten, dass die glänzende Oberfläche den Kontrastunterschied der drei verschiedenen Komponenten reduziert; die drei Teile liegen also optisch betrachtet näher beieinander, als es zunächst vielleicht den Anschein hat.
Color differentiation of plastic fittings
The color of plastic fittings should be controlled. At this, the high gloss factor of the surface reduces the contrast difference between the three different components.
|
|
|
Data sheet:
|
APP N° 296
|
Erkennung einer Dickstelle in einem schnell bewegten Kunststofffaserbündel Ein schnell bewegtes Kunststofffaserbündel soll in Hinblick auf Dickstellen überwacht werden. Hierzu wird ein Durchlicht-Lichtleiterkopf etwas unterhalb des normalen Faserbündelverlaufes angeordnet, sodass das Lichtbündel bei normalen Faserbündelverlauf nicht bedämpft wird. Bei Vorhandensein einer Dickstelle hingegen wird das Lichtbündel teilweise abgedeckt, was wiederum zu einer Abnahme des Empfängersignales führt.
Detection of a ravel in a fast moved plastic fiber bundle
A ravel in a fast moved plastic fiber bundle should be detected. At this, an optical fiber through beam head is placed in way, that the normal plastic fiber bundle stream does not cover the optical beam. However, if a ravel appears, the optical beam will be partly interrupted and this leads to a decrease of the receiver signal.
|
|
|
Data sheet:
|
APP N° 292
|
Anwesenheitskontrolle eines weißen Kunststoffgitters auf einem schwarzen Hintergrund Das Vorhandensein einer weißen Kunststoffgittermatte auf einem schwarzen Hintergrund soll kontrolliert werden.
Presence control of a plastic grid
The presence of a white plastic grid on a black background should be detected.
|
|
|
Data sheet:
|
APP N° 287
|
Farbmarkenerkennung auf einer bedruckten Aluminium beschichteten Kunststofffolie Schwarze Farbmarken sollen auf einer Aluminium beschichteten Kunststofffolie erkannt werden. Zur exakten Positionierung der Plastikfolie soll sowohl ein analoges als auch ein digitales Signal zur Verfügung gestellt werden.
Color mark detection on aluminum coated plastic film
Color marks should be detected on aluminum coated plastic foil. An analog as well as a digital signal is required at the sensor output.
|
|
|
Data sheet:
|
APP N° 280
|
Positionserfassung einer Kante auf der Frontseite einer Kunststofftube Während der Drehung einer Plastiktube soll eine Kante auf der Vorderseite der Tube erkannt werden.
Detection of an edge on a plastic tube
During the rotation of a plastic tube, an edge on the upper side of the tube should be detected.
|
|
|
Data sheet:
|
APP N° 279
|
Farbunterscheidung von Kunststoffschraubverschlüssen V Verschlusskappen unterschiedlicher Farbe (hellgelb, dunkelgelb, hellgrün und dunkelgrün) sollen kontrolliert werden.
Color control of plastic screw caps V
Different colored plastic screw caps (dark yellow, light yellow, light green and dark green) should be differentiated.
|
|
|
Data sheet:
|
APP N° 278
|
Farbkontrolle von Kunststoffschraubverschlüssen IV Drei verschiedene Kunststoffverschlusskappen (hellblau, blau und dunkelblau) sollen getrennt werden.
Color control of plastic screw caps IV
Three different colored plastic screw caps (light blue, blue and dark blue) should be differentiated.
|
|
|
Data sheet:
|
APP N° 277
|
Farbkontrolle von Kunststoffverschlusskappen III Drei verschiedene Kunststoffschraubverschlüsse (schwarz, hellgold und dunkelgold) sollen kontrolliert werden.
Color control of plastic screw caps III
Three different colored plastic screw caps (black, light gold and dark gold) should be differentiated.
|
|
|
Data sheet:
|
APP N° 276
|
Farbunterscheidung von Kunststoffverschlusskappen II Drei unterschiedlich gefärbte Kunststoffschraubverschlüsse (weiß, hellrot und dunkelrot) sollen kontrolliert werden.
Color control of plastic screw caps II
Three different colored plastic screw caps (white, light red and dark red) should be differentiated.
|
|
|
Data sheet:
|
APP N° 275
|
Farbunterscheidung von Kunststoffverschlusskappen Drei farblich unterschiedliche Plastikschraubverschlüsse (hellorange, dunkelorange und grau) sollen kontrolliert werden.
Color control of plastic screw caps I
Three different colored plastic screw caps (light orange, dark orange and gray) should be differentiated.
|
|
|
Data sheet:
|
APP N° 273
|
Farbdrifterkennung von Kunststoffflaschenrohlingen Die Farbdrift von Kunststoffflaschenrohlingen soll während des Handlingsprozesses rechtzeitig erkannt werden. Zu diesem Zweck wird eine Matrix aus Kunststoffrohlingen für einige hundert Millisekunden gestoppt, das ist ausreichend Zeit um einen der Rohlinge zu kontrollieren. Da verschieden farbige Rohlinge (z.B. klar, blau, grün, braun) produziert werden, muss das Farbkontrollsystem in der Lage sein, sich schnell an die ständig wechselnden Gegebenheiten anzupassen.
Detection of color drifts of plastic preforms
The drift of plastic preforms should be detected during the handling process. At this, the matrix with the preforms stops for a few hundred milliseconds, it is sufficient to check one of the preforms on each matrix. There will be preforms with different colors produced, thus the systems should be easy adapted to another color.
|
|
|
Data sheet:
|
APP N° 272
|
Erkennung eines Plastikklebebandes auf Kunststoffböden Ein Klebeband, das zwei Kunststoffbodenenden miteinander verbindet, soll erkannt werden. Dabei kann der Kunststoffboden verschiedene Farben einnehmen, während das Klebeband entweder gelb oder aber braun ist.
Detection of an adhesive tape on plastic flooring
An adhesive tape, which has the task to combine the two ends of the plastic flooring, should be detected. At this, the plastic flooring can be different in color; the tape, however, is either yellow or brown in color.
|
|
|
Data sheet:
|
APP N° 271
|
Erkennung einer Klebeschicht auf einer Kunststofffolie Das Vorhandensein einer Klebeschicht auf einer Kunststofffolie soll erkannt werden. Am besten sollte die ganze Breite der Klebeschicht kontrolliert werden. Der Kleberauftrag ist fluoreszierend bei Verwendung von UV-Licht (365nm … 385nm) und emittiert bei Anregung sichtbares blaues Licht. Die Kunststoffoberfläche verhält sich hingegen gegenüber UV-Licht neutral.
Detection of glue on a plastic film
The presence of a glue layer on a plastic film should be detected. Almost the whole width of the plastic film should be controlled. The glue is slightly UV fluorescent, whereas the plastic film is UV neutral.
|
|
|
Data sheet:
|
APP N° 267
|
Farbunterscheidung von Kunststoffbechern Rot glänzende Plastikbecher sollen von schwarz glänzenden Plastikbechern unterschieden werden. Dabei ist zu beachten, dass sich der Abstand vom Sensor zu den Bechern um einige mm ändern kann.
Color differentiation of plastic cans
Red glossy plastic cans should be differentiated from black glossy plastic cans. At this, the distance from the sensor to the cans is changing a few mm.
|
|
|
Data sheet:
|
APP N° 242
|
Anwesenheitskontrolle einer optisch transparenten Plastikfolie Das Vorhandensein einer transparenten Kunststofffolie soll überwacht werden. Dabei ist zu beachten, dass der Sensor mindestens 1m von der Folie entfernt angebracht werden muss und die Plastikfolie außerdem mit einer Amplitude von einigen mm flattert.
Presence control of an optical transparent plastic film
The presence of a transparent plastic film should be controlled. At this, the distance of the sensor to the plastic film should be in minimum 1m and it should be noticed, that the plastic film can flutter a few millimeters.
|
|
|
Data sheet:
|
APP N° 231
|
Schlierendetektion in transparenten farbigen Kunststoffverschlüssen Etwaige Schlieren in transparenten farbigen Kunststoffverschlüssen sollen während der Drehung der Plastikkappen erfasst werden.
Schlieren detection on transparent colored plastic closures
Schlieren on transparent colored plastic closures should be detected.
|
|
|
Data sheet:
|
APP N° 230
|
Farbkontrolle von transparenten Kunststoffverschlüssen Die Farbe von transparenten Plastikkappen soll kontrolliert werden. Dabei ist zu beachten, dass von Charge zu Charge unterschiedliche Kunststoffverschlüsse überwacht werden müssen und die Aufgabe besteht nun auch darin, das jeweilige Produkt im erlaubten Toleranzbereich zu halten.
Color control of transparent plastic closures
The color of transparent plastic closures should be controlled. At this, different colored transparent closures (e.g. orange, violet, magenta) will be produced and the task is to hold the respective color in a certain range.
|
|
|
Data sheet:
|
APP N° 225
|
Farbunterscheidung dreier Kunststoffteile aus dem Interieurbereich Drei farblich unterschiedliche Plastikteile sollen kontrolliert werden.
Color differentiation of three different plastic components in the interior field
Three different colored plastic parts should be differentiated.
|
|
|
Data sheet:
|
APP N° 224
|
Unterscheidung von Kunststoffdosen mit unterschiedlicher Wandstärke Plastikdosen gleicher Farbe und Kontur, jedoch unterschiedlicher Wandstärke sollen kontrolliert werden.
Differentiation of plastic bottles with different wall thickness
Plastic bottles with different wall thickness should be differentiated.
|
|
|
Data sheet:
|
APP N° 223
|
Farbkontrolle von Plastiksiebköpfen Farbabweichungen von Kunststoffsiebköpfen sollen detektiert werden.
Color quality control of plastic strainer
The quality of green as well of red plastic strainer should be controlled.
|
|
|
Data sheet:
|
APP N° 206
|
Farbkontrolle von zwei unterschiedlichen Türabdichtungsstreifen Zwei braune, leicht differierende Kunststoffabdichtungsstreifen sollen farblich unterschieden werden.
Color differentiation of brown plastic door seals
Two different brown colored plastic seals should be differentiated.
|
|
|
Data sheet:
|
APP N° 205
|
Farbtrennung von unterschiedlich weißen und grauen Dämmstreifen aus Kunststoff Plastikdämmstreifen verschiedener Weiß- sowie Grautöne sollen voneinander unterschieden werden.
Color differentiation of plastic stripes
Different colored plastic stripes should be differentiated.
|
|
|
Data sheet:
|
APP N° 201
|
Farbkontrolle von Plastikschraubverschlüssen Verschiedene Schraubverschlüsse sollen in Hinblick auf die Farbe kontrolliert werden. Dabei ist zu beachten, dass jede Farbe eines Kunststoffschraubverschlusses innerhalb der vorgegebenen Toleranzen liegt.
Color control of plastic closures
The color of plastic closures should be controlled. The main task is not to distinguish between different colors but to check, whether the same closure is in a certain color tolerance.
|
|
|
Data sheet:
|
APP N° 200
|
Farbkontrolle von PET-Flaschenrohlingen Die Farbe von extrem dunklen PET-Rohlingen soll überwacht werden.
Color control of PET preforms
Different colored PET preforms which are used in the bottle industry should be differentiated.
|
|
|
Data sheet:
|
APP N° 187
|
Erkennung eines transparenten Kunststoffetiketts auf einer transparenten Kunststofffolie Die Position eines transparenten Etiketts auf einer transparenten Folie als Trägermaterial soll detektiert werden. Die Transportgeschwindigkeit der Trägerfolie beträgt dabei einige m/s.
Detection of the position of optical transparent plastic label on optical transparent plastic film
The position of a transparent label on a transparent film should be detected. At this the speed of the film is in the range of a few m/s.
|
|
|
Data sheet:
|
APP N° 180
|
Erkennung einer perforierten Linie in einer Kunststofffolie Eine perforierte Line in einer Kunststofffolienbahn soll detektiert werden. Zu beachten ist dabei, dass die Plastikfolie mit einigen m/s transportiert wird und der Durchmesser der Löcher im Bereich von 0.3mm liegt.
Detection of a perforation line in a plastic film
A perforation line should be detected in a plastic film. At this, the speed of the plastic film is a few m/s and the diameter of the holes in the plastic film is approximately 0.3mm.
|
|
|
Data sheet:
|
APP N° 178
|
Kantenerkennung eines Kunststoffetiketts auf einem Kunststofffilm Die Kante des Etiketts soll auf einer Kunststofffolie festgestellt werden.
Edge detection of a plastic label on a plastic film
The edge of a plastic label should be detected on a plastic film.
|
|
|
Data sheet:
|
APP N° 176
|
Farbunterscheidung von Plastikflaschen Während des Recyclingprozesses sollen verschieden farbige PET-Flaschen sortiert werden. Selbst nur leicht blau getönte Plastikflaschen müssen von den klar transparenten PET-Flaschen unterschieden werden. Die Geschwindigkeit der Flaschen beträgt dabei einige m/s. In den Flaschen kann sich Kondenswasser angesammelt haben, das zu Wassertropfen im Flascheninneren führt. Darüberhinaus befinden sich Etiketten auf den Flaschen.
Color differentiation of plastic bottles
During the recycling process different colored PET-bottles should be separated. Even light blue colored plastic bottles must be differentiated from clear transparent PET-bottles. At this the speed of the bottles is a few m/s. There can be condense water accumulated in the bottles, which causes water drops inside the bottles. Furthermore the bottles come with a label.
|
|
|
Data sheet:
|
APP N° 161
|
Breitenkontrolle eines PU-Profils Ein PU-Strang mit rechteckförmigem Querschnitt soll während der Produktion in Hinblick auf die Breite überwacht werden.
Width control of polyurethane profiles
The width of different colored polyurethane profiles should be measured during the production.
|
|
|
Data sheet:
|
APP N° 160
|
Höhenkontrolle von PU-Profilen Die Höhe von verschiedenen PU-Profilen soll während der Produktion überwacht werden. Dabei muss berücksichtigt werden, dass Licht je nach Farbe des Objektes unterschiedlich tief in die Objektoberfläche eindringt.
Height control of polyurethane profiles
The height of different colored polyurethane profiles should be controlled. It has to be aware that the polyurethane material is slightly milky which means, that light which is directed onto the profile will partly enter the surface.
|
|
|
Data sheet:
|
APP N° 159
|
Farbkontrolle von Plastikknöpfen im Interieurbereich Kunststoffknöpfe, wie sie im Automotivebereich zum Einsatz kommen, sollen in Hinblick auf die Farbe unterschieden werden. Zu beachten ist, dass die Ausrichtung der Knöpfe am Kontrollort willkürlich vorliegt.
Color control of plastic buttons in the automotive interior field
Plastic buttons should be color controlled. It has to be taken into account, that the angle alignment of the plastic buttons is arbitrary during the control process.
|
|
|
Data sheet:
|
APP N° 158
|
Kantenerfassung einer transparenten Kunststofffolie während der Produktion Die Lage einer transparenten Plastikfolie soll während des Umspulprozesses erfasst werden.
Edge position control of a transparent plastic film
The position of the edge of a transparent plastic film should be controlled.
|
|
|
Data sheet:
|
APP N° 156
|
Farbunterscheidung von schwarzen und dunkelbraunen Plastikkomponenten im Interieurbereich Die beiden Kunststoffteile (schwarz und dunkelbraun) sollen erkannt werden. Dabei ist zu berücksichtigen, dass bedingt durch die Montagesituation sowohl die Vorder- als auch die Rückseite zu kontrollieren ist.
Color differentiation between black and dark brown plastic interior components
Two plastic interior parts should be color differentiated. Due to assembly reasons, the backside as well as the front side of the two components should be controlled, respectively.
|
|
|
Data sheet:
|
APP N° 131
|
Farbunterscheidung von Kunststoffdrähten Kunststoffdrähte sollen in Hinblick auf die Farbe kontrolliert werden.
Differentiation of plastic monofilaments
Plastic monofilaments, different in size or in color, should be differentiated.
|
|
|
Data sheet:
|
APP N° 122
|
Richtungsüberwachung während des Transportes von Kapseln Die Richtung von Kapseln während der Beförderung in einer mechanischen Führung soll kontrolliert werden. Die Kapselhälfte mit dem größeren Durchmesser soll während des Transportes voraus eilen.
Dabei beträgt der Durchmesserunterschied der beiden Kapseln ca. 0.3mm. Die Kapseln werden mit einer konstanten Geschwindigkeit von ca. 0.4m/s befördert. Verschiedene Kapselgrößen von 3mm bis 8mm Durchmesser müssen überwacht werden.
Capsule direction control
The direction of capsules in a mechanical guide should be controlled. The capsules consist of two parts at which one component has a diameter which is approximately 0.3mm bigger as the other. The capsules will be linearly moved with a speed of 0.4m/s and the diameter of the different types is between roughly 3mm and 8mm. The color of the capsules can change from white to black, all colors even transparent types are possible.
|
|
|
Data sheet:
|
APP N° 121
|
Anwesenheitskontrolle eines Rillenprofils an einem transparenten Kunststoffdeckel An einem transparenten Verschlussdeckel soll abgefragt werden, ob das Rillenprofil durchgehend vorhanden ist. Bei fehlerhaften Teilen kann es vorkommen, dass das Rillenprofil auch stellenweise vorhanden ist.
Control of the presence of straight knurling on a transparent plastic closure
On a transparent plastic closure the straight knurling should be detected. On incorrect closures the straight knurling is partly not present.
|
|
|
Data sheet:
|
APP N° 120
|
Doppellagenkontrolle von Blisterfolien Beim Handling kann es vorkommen, dass anstelle einer gepressten transparenten Folie gleich mehrere Kunststofffolien transportiert werden, was entsprechend kontrolliert und nach Möglichkeit verhindert werden sollte.
Double transparency film control
The presence of a transparent blister foil should be controlled with a reflective sensor system. Furthermore it must be distinguished between one, two or three blisters.
|
|
|
Data sheet:
|
APP N° 108
|
Knotenüberwachung und Defektkontrolle an Drähten sowie Fäden Knoten und Defekte an Drähten sowie Fäden sollen erfasst werden. Dabei können unterschiedliche Produktdurchmesser vorkommen; die Produktgeschwindigkeit liegt dabei bei einigen m/s.
Knot and defect control of mono filaments
Knots as well as defects on mono filaments and threads should be detected. At this, different diameters of filaments and threads are possible and the feed rate lies in the range of a few m/s.
|
|
|
Data sheet:
|
APP N° 103
|
Mehrfachlagenkontrolle von Blisterverpackungen Während des Handlingsprozesses von Blisterverpackungen soll kontrolliert werden, ob eine oder mehrere Blisterverpackungen vom Stapel genommen worden sind.
Control of the number of blister packages
During the handling process of blister packages it can happen, that more than one blister package will be transported simultaneously, this should be avoided.
|
|
|
Data sheet:
|
APP N° 96
|
Unterscheidung Vorderseite / Rückseite eines Kunststoffverschlusses Während der Produktion von Feuchtetücherplastikboxen muss der Kunststoffdeckel auf Lagerichtigkeit (Vorderseite/Rückseite) kontrolliert werden.
Differentiation between front side and back side of closures
During the production of dispensers for moist wipes the closure site (front side and back side) must be controlled.
|
|
|
Data sheet:
|
APP N° 92
|
Farbunterscheidung von Kunststoffkomponenten für Injektionsnadeln Die Farbe von Kunststoffeinsätzen für Injektionsnadeln soll überwacht werden, dabei können auch innerhalb des gleichen Farbtyps von Charge zu Charge unzulässig hohe Abweichungen auftreten, die dann erkannt werden sollten.
Color differentiation of syringe capsules
Syringe capsules must be color differentiated. At this, there should be detected also an unacceptable color change from batch to batch of the same capsule type.
|
|
|
Data sheet:
|
APP N° 86
|
Unterscheidung von Kunststoffteilen ob Aussparung vorhanden oder nicht vorhanden ist Kunststoffteile verschiedener Farben mit vier Rippen bzw. fünf Rippen sollen unterschieden werden.
Differentiation of different colored plastic parts with different number of bars
Plastic parts with four (the bar located in the middle is shorter) and five long bars must be distinguished independent of the color.
|
|
|
Data sheet:
|
APP N° 74
|
Inlineglanzkontrolle von Kunststofffolien sowie laminierten MDF-Platten Während der Produktion von Kunststofffolien sowie laminierten MDF-Platten soll der Glanzgrad gemessen und aufgezeichnet werden.
Inline gloss measurement of plastic films and laminated plates
During the production of plastic films as well as of laminated plates the gloss factor should be measured.
|
|
|
Data sheet:
|
APP N° 71
|
Positionsüberwachung von transparenten Kunststofffolien Die Position einer transparenten Kunststofffolie soll innerhalb eines Bereiches von 50mm überwacht werden.
Optical transparent plastic foil position control
The position of an optical transparent plastic film should be controlled in a range of approximately 50mm.
|
|
|
Data sheet:
|
APP N° 20
|
Farbkontrolle von Kunststoffverschlusskappen Die Farbe von Plastikverschlusskappen soll überwacht werden.
Closure head color control
Different plastic closure heads should be color controlled.
|
|