SI-COLO3 Series
Reflective color sensors (max. 15 colors)General technical data ....
GENERAL TECHNICAL DATA:
Software | Windows® PC software: SI-COLO3-Scope |
Voltage supply | +24VDC (± 10%), reserve polarity protected, overload protected |
Current consumption | - SI-COLO3-...-dx, SI-COLO3-...-LUMI: <180mA - SI-COLO3-...-DIL, -FCL: <220mA - SI-COLO3-FIO: <180mA |
Max. switching current | 100mA, short circuit proof |
Switching state indication | 4 yellow LEDs (OUT0 ... OUT3) |
Input digital (1x) | IN0 (0V/+24V) or teach button at the sensor housing |
Outputs digital (4x) | OUT0 .... OUT3 (0V/+24V) |
Interface | RS232 (USB and Ethernet adaptor available) |
Pulse lengthening | 0...100ms, abjustable via PC software |
Averaging | max. 32768 values, abjustable via PC software |
Switching frequency | max. 1,6 kHz in case of 15 colors to be taught max. 11,5 kHz in case of 1 color to be taught max. 95 kHz in acse of contrast detection |
Receiver | 3-color filter detector |
Alternating light operation | 100 kHz |
Ambient light | max. 5000 Lux |
Reproducibility | in x,y color range each 1 digit at 12-bit A/D conversion |
Temperature drift X,Y | deltaX/deltaT, deltaY/deltaT: typ. 0.3 digits/°C (< 0,01%/°C) |
Color space | X/Y/INT, s/i/M, X/Y INT, s/i M (Lab) |
Color memory | non-volatile EEPROM with parameter sets for max. 15 colors |
Housing material | Aluminum, anodized in blue (if optics holding device: anodized in black) |
Connectors | - to PLC: 8-pole fem. connector Binder 712 - to PC: 5-pole fem. connector Binder 707 - to transmitter unit SI-SLU (only with SI-COLO3-200-SLU): 5-pole connector Binder 712 |
Connecting cables | - to PLC: cab-las8/SPS - to PC: cab-las5/PC, cab-5/USB or cab-5/ETH |
Operating temp. range | -20°C ... +55°C |
Enclosure rating | IP64 |
EMC test acc. to | DIN EN 60947-5-2 |