|
Folha de dados:
|
APP N° 794
|
Kontrola istnienia bardzo cienkich filmów olejowych Należy sprawdzać obecność bardzo cienkiej warstwy oleju (< 1µm).
Presence control of a very thin oil layer
The presence of a very thin oil layer (< 1µm) should be controlled.
|
|
|
Folha de dados:
|
APP N° 711
Param.:
|
|
Kontrola koloru płynnych lakierów przez wzierniki Barwa płynnych lakierów powinna być kontrolowa-na przez wzierniki. Należy przy tym przestrzegać, aby płytki szklane posiadały powierzchnię refleksyjną.
Color checking of the paintwork through sight glasses
The color of liquid lacquers should be controlled in using sight glasses. It should be taken into account, that the sight glasses have a reflecting surface.
|
|
|
Folha de dados:
|
APP N° 673
|
Kontrola strumienia rozpylanej cieczy za pomocą systemu przechodzącego promieniowania laserowego Intensywność oraz geometria strumienia rozpylanej cieczy powinna być kontrolowana w bezpośredniej bliskości wylotu z dyszy.
Spray jet control with a laser through beam system
The amount of liquid and the geometry of a spray jet next to the spray nozzle should be controlled.
|
|
APP N° 626
|
Kontrola intensywności dodatków fluoroscencyjnych w papierze nasączonym olejem Powinna być kontrolowana intensywność dodatków fluoroscencyjnych w papierze nasyconym olejem.
Intensity control of fluorescent additives in oil-soaked paper
The intensity of fluorescent additives in oil-soaked paper should be controlled.
|
|
|
Folha de dados:
|
APP N° 598
Param.:
|
INI:
|
|
Kontrola barwy płomienia Powinna być kontrolowana barwa płomienia.
Color control of flames
The color of a flame should be controlled.
|
|
|
Folha de dados:
|
APP N° 517
Param.:
|
INI:
|
|
Kontrola koncentracji pasywatora w roztworze Powinna być kontrolowana ilość pasywatora w roztworze.
Concentration control of a passivator in a solvent
The amount of a passivator in a solvent should be controlled.
|
|
|
Folha de dados:
|
APP N° 459
Param.:
|
INI:
|
|
Rozróżnianie odwrotnej strony pierścienia plastykowego od strony przedniej Powinno być kontrolowane położenie (strona przednia na górze - na dole) pierścieni z tworzywa sztucznego, które mają być transportowane na przenośniku taśmowym.
Plastic ring bottom side – upper side differentiation
Plastic rings which are transported on a conveyor belt should be differentiated with a view to the direction (bottom side – upper side).
|
|
|
Folha de dados:
|
APP N° 458
Param.:
|
INI:
|
|
Rozpoznawanie miejsca rozdziału na taśmie Fleece z tworzywa sztucznego Powinno zostać wykryte miejsce rozdziału na taśmie plastykowej Fleece. Należy przy tym zwracać uwagę, żeby zarówno miejsce rozdziału jak i materiał Fleece były białe, by nie powstawała różnica barw.
Cut off point detection on a fleece tape
The cut off line on a fleece tape should be detected. It should be taken into account, that the fleece tape as well as the cut off line is white in color, thus, there is no color difference.
|
|
|
Folha de dados:
|
APP N° 457
|
Rozpoznawanie położenia warstwy silikonowej na przezroczystej taśmie klejącej Powinno zostać wykryte położenie warstwy silikonowej na przezroczystym filmie z tworzywa sztucznego (rozpoznanie na stronie przedniej i odwrotnej taśmy).
Position detection of a silicon layer on a transparent plastic film
The position of a silicon layer on a transparent plastic film should be detected (frontside / backside differentiation).
|
|
|
Folha de dados:
|
APP N° 213
|
Detekcja obecności piany w płynie Zadaniem czujnika jest wykrycie piany na powierzchni płynu. Dodatkowo czujnik powinien mierzyć poziom płynu (i piany, jeśli jest obecna).
Detection of the presence of foam on a liquid
The presence of the foam on a liquid should be detected. Furthermore the liquid level (+ foam, if present) should be measured simultaneously.
|
|
|
Folha de dados:
|
APP N° 195
|
Rozróżnianie koloru oleju fluorescencyjnego Czujnik rozróżnia oleje używane w różnych typach silników samochodowych przy wykorzystaniu naturalnej fluorescencji oleju mineralnego. Aby odróżniać konkretne typy oleju stosowane są płynne dodatki UV.
Color differentiation of fluorescent oil
Different oil types which are used for engines should be differentiated. At this, the natural effect of UV fluorescence of mineral oil is used. Furthermore fluorescent liquid will be added to some of the mineral oils, which allows a differentiation of the adequate types.
|
|
|
Folha de dados:
|
APP N° 126
|
Kontrola koloru lakierów Zadaniem czujnika jest kontrola koloru lakieru przy pomocy specjalnej obudowy chroniącej czujnik.
Color control of lacquers
The lacquer should be inline controlled. At this a special casing is used which will be plunged into the lacquer.
|
|
|
Folha de dados:
|
APP N° 111
|
Kontrola kropli laserową barierą jednodrogową Czujnik kontroluje ilość oraz wielkość kropli.
Drop control with a laser through beam system
The number as well as the volume of drops should be controlled.
|
|
|
Folha de dados:
|
APP N° 55
|
Kontrola koloru emulsji Zadaniem czujnika jest kontrola koloru emulsji z uwzględnieniem niewielkich zmian odcienia na lekko czerwony lub lekko zielony.
Color control of an emulsion
The color of the emulsion which should be controlled is normally white but it can happen that the color is drifting slightly into the red or the green range. This drift must be controlled.
|
|
|
Folha de dados:
|
APP N° 23
|
Kontrola kolorowych płynów Podczas cyklu przetwarzania płynów konieczna jest kontrola jakości.
Colored liquid control
During a water cycle process the quality of the water must be controlled. It can happen that the water becomes slightly blue (pollution) or beige (oily) in color. Both case must be detected, the water must be clean.
|
|